Why is it important to clearly define and classify quality defects for your products?
Imagine you’re manufacturing women’s blouses in Indonesia. A product inspection report from your QC partner shows about one-third of the blouses have untrimmed threads.
Would you classify this quality defect as “minor” or “major”? You might say untrimmed threads are a “minor” defect that don’t affect the salability of the product. Or you might consider them a “major” defect if you distribute your product to a high-end retailer with a lower tolerance for quality issues.
Here we’ll help you get started by explaining the most common ways to classify defects in different products.
Defect classification is a vital step for determining if goods should pass or fail inspection. And considering the quantity and severity of different types of defects found helps you make an informed shipping decision.
A professional inspection company often has established standards for classifying various types of defects for a particular product type. But it’s ultimately your responsibility as the buyer to decide your tolerance for different defects, often using a system like Acceptable Quality Limits (AQL) (related: The Importer's Guide to Managing Product Quality with AQL [eBook]).
Quality control professionals typically classify quality defects into three main categories. The nature and severity of a defect determine which categories it belongs in.
Brands and retailers have the power to specify how many of each type of defect they’re willing to accept in their finished goods. This tolerance, in turn, impacts how many units per SKU an inspector would check during inspection—the sample size.
Importers commonly set these quality tolerances using a statistically valid acceptance sampling method known as acceptable quality limits, or acceptable quality levels (AQL) (related: 10 AQL Terms Importers Should Know to Succeed with AQL for Inspection).
An importer’s tolerance for minor defects tends to be greater than that for major or critical defects, given their relative severity. Let’s look at each of these defect types in detail.
Importers often set the highest tolerance—or AQL, if applying that standard—for minor defects in their inspected sample size. But an item can still fail inspection if the number of minor defects found exceeds the limit set by their tolerance (related: How AQL Sampling Affects Your Inspection Results).
Major defects are more serious than minor defects. A product with
These defects are readily noticeable by the customer. And these defects would likely cause a customer to return the product, lodge a complaint or request a refund in response.
Most importers set a lower limit for major defects than minor defects in their inspected sample size. They’ll often accept an order with relatively few major defects. But they’re likely to reject an order or ask their supplier to hold or rework it if the goods fail inspection due to an excessive number of major defects found.
These defects put businesses at serious risk of product liability issues, lawsuits and product recalls.
Many importers have a “zero tolerance” policy for critical defects in their orders commensurate with this risk. An item will often fail product inspection if a single critical defect is found within the order.
Different quality defects can appear in different products depending on materials, production processes and standards used. Below are some common examples of minor, major and critical defects in different product types.
Softline products include raw fabric, home textiles, garments and other woven or knitted products and footwear. Garments, in particular, tend to be more vulnerable to quality defects because of the labor-intensive production processes involved in their manufacturing.
Human hands involved in sewing and stitching, for example, raise variability in production. Whereas more automated production processes, like the use of injection molding in hardline goods or robotics in electronic assembly, tend to lower variability. This typically results in more consistent product quality throughout a production run.
Some common softline defects include:
Hardline products include a broad range of goods typically made of metal, wood or plastic materials. This category includes most furniture, sporting equipment, cookware, building materials and tools.
Some common hardline defects include:
Electrical and electronic (E&E) products include consumer electronics, many household appliances, certain toys, power tools and other products that require electricity to function.
Industrial components is a broad term that can include fabricated steel, conduit piping, gas valves, wind turbines, maritime equipment and other machinery or materials designed for industrial use.
Some common defects in industrial products include:
A QC professional can often suggest appropriate tolerances for known defects for your product. But it’s ultimately up to you as the buyer to specify your tolerance for each kind of quality defect.
Importers often list their defect classifications and tolerances in a document known as a quality control, or QC, checklist (related: 5 Essentials of a QC Checklist [eBook]). A QC checklist also typically includes other information like packaging requirements, on-site testing procedures and required inspection equipment.
This document should include an exhaustive list of common and known quality defects with your product type.
Accounting for every single quality defect may not be possible. But the more complete the list of potential defects you provide, the more likely your supplier will be to heed your tolerances. Your QC inspector is also far more likely to apply the same standard when checking your products against a complete QC checklist.
A defect classification list might look something like the below example for footwear:
This defect classification list might extend to include 20 or even 30 different types of defects depending on your product type. The more information you can provide, the better prepared your QC team and supplier will be.
Identifying quality defects in your order before shipment is essential to ensuring your goods meet your customers’ expectations.
Third-party inspection companies can inspect your order and report to you the number and types of defects found in the inspected sample size. Their report will typically show you the total number of defects found in comparison to the number of defects allowed based on your tolerances.
The order will fail inspection if the number of defects found exceeds the allowed number. As you can see in the below excerpt, this order would fail inspection due to the number of minor defects exceeding the allowed number:
While this order would fail inspection based on AQL standards, it’s up to you as the importer to decide whether to ship the order (related: What Inspection Results Do and Don’t Mean for Your Shipment).
You might want to address any quality defects before approving a shipment. To address product defects found in your order during inspection, you might:
And remember to continually update your defect classifications to add new quality defects or adjust your tolerances for new orders. Updating your QC checklist can help prevent the recurrence of known quality defects in your received shipments.
These are rough guidelines QC professionals typically follow for defect classification (related: Why QC Professionals Use AQL Sampling for Product Inspection). But as the buyer, always consider the severity of different defect types and their effect on your customers and brand when setting tolerances.
Tell your inspector if they’ve classified a defect in a different category than you consider appropriate. This feedback allows them to adjust reporting for future inspections. Likewise, if an inspector finds “defects” you do not consider to be defects at all, inform the inspector to disregard those in future reporting.
These changes help ensure you receive the most accurate reporting possible so you can take appropriate action to address issues before they affect your customers.
If you'd prefer to listen to this topic instead, check out this manufacturing podcast!
If you want to verify 100% of your oders and remove all defective products, the best thing to do is book a defect sorting service from AQF. Our qualified inspectors will examine the entire batch of finished goods in detail before shipment to identify and remove any defective products from the production batch. Defect-free products are shipped while finished goods with defects are discarded or reworked.
Contact us today or sign up for AQF Online to book your next quality inspection today.
Editor’s note: This post was originally published in November 2015 and has been updated for freshness, accuracy and comprehensiveness.
What other quality defects are especially problematic in the products you import? Share in the comments below!